search
WebsiteDiscord

gearBAAN Fuser Setup

This Guide is suited to the BAAN HDMI/Display Port Fusers

hashtag
1. Fuser Setup Guide

Before You Begin

  • Disconnect all displays except your main monitor.

  • Make sure the Fuser is powered off before connecting any cables.

  • Use only certified HDMI 2.1 or DisplayPort 1.4 certified cables for the best performance and signal stability.

hashtag
Fuser Layout

On the back side of the Fuser, you’ll find three labelled ports:

  • Output (HDMI or Display Port)

  • Input 1 (HDMI)

  • Input 2 (HDMI)

hashtag
Connection Order (with Fuser Off)

1️⃣ Output → Monitor • Connect DisplayPort (1.4) or HDMI (2.1) from the Fuser’s Output port to your main monitor.

2️⃣ Input 1 → Main PC • Connect HDMI (2.1) or DP (1.4) from your Main PC’s GPU to Input 1 on the Fuser.

3️⃣ Input 2 → Secondary PC (Radar PC) • Connect HDMI (2.1) or DP (1.4) from your secondary machine’s GPU to Input 2 on the Fuser.

hashtag
Important Notes

  • The main PC’s GPU must not be connected directly to any monitor during setup. If a direct DisplayPort or HDMI cable is plugged into the monitor, unplug it before setup.

  • Once all connections are made, you may power on the Fuser, then both of your PCs.

  • Using mismatched or lower-grade cables (HDMI 2.0 / DP 1.2) can result in no signal or screen flickering.

hashtag
2. Configure Display Settings

On Both PCs:

  • Connect PC's Directly to Monitor

  • Right-click on an empty area of the desktop.

  • Select Display Settings.

  • Scroll down to the Multiple displays section and select Extend these displays.

On the 2nd PC:

  • Go to Start > Settings > Personalization > Background/Wallpaper.

  • Under Personalize your background, select Solid Colour and choose Black.

hashtag
3. Reconnect Cables to the Fuser

  • Ensure all three cables are connected to the Fuser as per point the connection layout above.

  • Make sure the monitor is no longer directly connected to the Gaming PC's GPU.

hashtag
Fuser Button Functions

Power

  • Function: Turns the Fuser on or off.

K1 — Display only the second pc's screen.

K2 — Display only the main pc's screen.

K3 — Activates the ovverlay (continuous toggles, adjusts perspective intensity).

K4 — Switch the monitors encoding format (useful for older monitor formats).

Note: If the fusion light is on but no perspective fusion appears, try one of the following:

  1. Set the secondary display’s background color to pure black.

hashtag
Troubleshooting

Desktop Apps Are Merged / Two Search Bars Visible

  • Press K3 (Main Screen Mode) when no overlay is active.

Second Monitor Shows "No Signal"

  • Ensure the 2nd monitor is turned on.

  • The 2nd monitor should be connected to its respective PC, not the Fuser.

Refresh Rate Issues (Limited to 60Hz or 90Hz)

  • This indicates not all HDMI cables are HDMI 2.1 or Display Port 1.4.

  • Use Certified cables for the Fuser setup.

PreviousDichen Fuser SetupNextEDID Spoofing

Last updated